Forestry project checks: constraints
This
How page tells you how to identify common constraints and designations withinin your forestry project’s proposal area and sets out what youaction mustto considertake or do in relation to individual constraints.
- From:
- Forestry Commission
- Published
- 28 September 2021
- Last updated
-
2628 February20242025 — See all updates
Applies to England
Use this page to help you:you:
- design a forestry
projectproject - apply for a felling
licencelicence - apply for a forestry Environmental Impact Assessment (EIA
)) - apply for a forestry grant
schemescheme - create a woodland management plan
Use this page alongside:alongside:
ThisForestry pageproposals walkswithin yousensitive throughareas theand considerationsstatutory anddesignations actionshave youconstraints shouldthat takerequire inconsent relationfrom tothe forestryauthority projectsresponsible. You must ensure that involveall specificnecessary constraints.permissions are in place before starting any forestry work. In addition to these specific constraints, there are some considerations and actions that you need to undertake in relation to all forestry projects.
PleaseThe seeForestry Commission uses the Forestryword project‘constraint’ checks:to allindicate projectswhere pageforestry forproposals morewill information.need to take a particular feature into account and potentially amend initial proposals to accommodate that feature. The presence of a constraint does not always prohibit tree planting if the proposal’s impact on the feature can be avoided, compensated or mitigated.
How to find constraints on your land
Use the Forestry Commission map browser to look at environmental information about your land. WithinYou this browser, you can use theour Forestry Commission’s Land Information Search tool to create a report that shows common constraints and designations on, and information about, your land.
OtherUse Defra’s MAGIC map for other important environmental information, such as information on Higher Level Stewardship and Agricultural Land Classifications,Classifications.
You canshould bealso foundcomplete ona Defra’slocal MAGICrecords mapchecks, read forestry project checks: all projects.
Once you’ve found out what constraints and designations are on your land, or might be affected by it, use this quick guide page to see whether you need to engage with stakeholders, apply for a licence, or get consent or other permission priorbefore to carrying out your project.
MAGIC map and the Forestry Commission map browser will not show every constraint on your land. Not all data is nationally mapped, for example, Tree Preservation Orders (TPOs) and Conservationconservation Areasareas.
Using MAGIC and the Forestry Commission Map Browser should be part of your wider due diligence, which should also include local records checks – see Forestry project checks: all projects.
Acid Vulnerable Catchments (AVCs)
Where to check for this constraint
UseUsing the Forestrymap Commissionbrowser Mapopen Browser‘Map Layer:Layers’.
Check: Targeting and scoring > CS HT Water – Water Quality – Acidification (Silvicultural Transformation).Transformation).
Key points for applicants
Forestry is known to affect water acidification and so it is important to manage forestry within vulnerable areas to ensure acidification is not exacerbated. This is particularly important in relation to large-scale conifer planting.
See Check Forest Research’s Acid Vulnerable Catchment (AVC) mapping, which marks areas that are ‘at risk’ or marked as ‘fail’.
If you are planning an afforestation project, AVCs are excluded from ‘low risk land’ for the purposes of forestry EIA.
What to do if this affects your proposal
If your proposal is in an area that is ‘at risk’ or ‘failing’, refer to Forest Research’s Practicepractice Guidanceguidance Managing forests in acid sensitive water catchments to identify whether you’reyou requiredneed to carry out a critical load assessment.
If significant acidification of soils could present an issue, you must engage potential stakeholders, such as the Environment Agency or local water authorities. TheWe Forestry Commission will take into account the Environment Agency’s views on your proposal, and suggested mitigation,mitigation intoon accountyour inproposal when determining your application.
Further guidance
Forest Research – AVC mapping
Forest Research Practice Guide: Managing forests in acid sensitive water catchments
Agricultural Land Classification (best and most versatile agricultural land – Class 1, 2 and 3a)
Where to check for this constraint
UseUsing Defra’s MAGIC map Layer:open ‘Map Layers’.
Check: Landscape > Landscape Classifications > Agricultural Land Classification – Provisional (England).(England).
Key points for applicants
Agricultural land in England and Wales is classed using Agricultural Land Classification (ALC) from 1 (best) to 5 (very poor quality). Best and most versatile agricultural land is in Classes 1, 2 and 3a. It is important for identifying land that may be best preserved for food production.
If you are planning an afforestation project, the best and most versatile agricultural land is excluded from ‘low risk land’ for the purposes of forestry EIA.
The data on Defra’s MAGIC map is from before 1988. If you believe the data to be incorrect, you should raise your concerns with Natural England. Natural England also has a series of Regional Agricultural Land Classification maps, which may be of use.
What to do if this affects your proposal
If you are unsure about whether your proposal is likely to affect best and most versatile agricultural land, you can contact Natural England for further advice. However, you do not need any additional consents in relation to forestry works on this land type. Loss of agricultural production may be taken into consideration by the Forestry Commission in determining your application.
Further guidance
AboutRead more about ALC grades
Natural England Regional Agricultural Land Classification Maps.
Ancient Woodland
Where to check for this constraint
UseUsing Forestrythe Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Ancient Woodland,Woodland, then choose:
- Ancient & semi-natural woodland
- Ancient replanted woodland
UseYou can also use Defra’s MAGIC map. Layer:Open ‘Map Layers’.
Check: Habitats and species > Habitats > Woodland > Ancient Woodland (England), then choose:
- Ancient & semi-natural woodland
- Ancient replanted woodland
Key points for applicants
Ancient woodlands are areas in England that have been wooded continuously since at least 1600 AD.
Ancient woodland includes ancient semi-natural woodland (ASNW) and plantations on ancient woodland sitessites, (PAWS), also known as ancient replanted woodland.
Other distinct forms of ancient woodland are ancient wood pasture and parkland (AWPP) and infilled ancient wood pasture and parklandparkland. (IAWPP). However, many of these do not appear on the ancient woodland inventory (AWI) because their low tree density does not register as woodland on historic maps, and as a result they are not identified in our map browser or on Defra’s MAGIC map.
The value of an ancient woodland lies in its pristine, undisturbed soils, which provide a unique habitat. Many of the trees standing within an ancient woodland are often not particularly old.
The UK Forestry Standard places restrictions on the scope of works that should be undertaken on ancient woodland sites.
Current government policy on managing ancient woodlands is set out in the policy document Managing ancient and native woodland in England.
Ancient woodland is not listed as a land sensitivity type for forestry EIA purposes, however, the Forestry Commission will apply government policy on ancient woodland when assessing applications made in relation to them. Additionally, some ancient woodland sites are subject to other constraints, such as Sites of Special Scientific Interest (SSSI) designation.
Ancient woodland over 0.5 hectares is mapped by Natural England and can be found on MAGIC and on the Forestry Commission map browser.
What to do if this affects your proposal
TheWe Forestry Commission will take into account ancient woodland when deciding upon your proposal. You can contact your local Forestry Commission Woodland Officer for advice to ensure that your proposal is designed to account for ancient woodland.
Further guidance
ManagingRead ancientmore andon native woodland in England
UK Forestry Standard
Ancient woodland, ancient trees and veteran trees: advice for making planning decisions.
NaturalNational landscapesLandscapes (formerly Areas of Outstanding Natural Beauty)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer: open ‘Map Layers’.
Check: Constraints > Areas of Outstanding Natural Beauty.
Key points for applicants
There are 34 National Landscapes (the new name for ‘Areas of Outstanding Natural Beauty’ or AONBs) in England. They are designated by Natural England but are often managed by a National Landscape Conservation Board.
You can read about each National Landscape designation on the National Landscapes Association website. This may make reference to trees or woodlands that are important to the area.
National Landscapes are considered ‘sensitive areas’ for forestry EIA purposes.
AONBsNational Landscapes are considered ‘sensitive areas’ for forestry EIA purposes.
What to do if this affects your proposal
Ensure that your proposal is complementary to the aims, objectives and characteristics of the National Landscape, and engage the National Landscape Conservation Board for advice where necessary.
Further guidance
National Landscapes Association
The Broads (Norfolk Broads)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > National Parks.
Key points for applicants
The Norfolk Broads are a National Park (see National Parks). The Broads are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
Refer to the guidance on National Parks on this page.
Further guidance
Read more on the Broads Authority website.
Burial grounds
Where to check for this constraint
Contact the relevant local authority archaeology/historic environment service to discover if there are any known disused burial grounds within your proposal area.
Key points for applicants
Human remains within burial grounds are protected from disturbance or removal by legislation. These include known prehistoric, Roman, medieval and postpost-medieval medieval burial grounds that are not legally consecrated. These are controlled by secular legislation.
Burial grounds are not listed as a land sensitivity type for forestry EIA purposes. However, relevant legislation must be complied by the applicant and their existence may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
An exhumation licence is required from the Ministry of Justice before trees can be planted or quarries excavated on burial grounds protected by secular legislation. Depending on the level of ground disturbance involved, an exhumation licence may be required ahead of road construction and deforestation.
Read more in Archaeology UK: Advisory Panel on the Archaeology of Burials in England (sections 8-12 and Annex L1).
Common land
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > CRoW2000 - S4 Registered Common Land.
Key points for applicants
Common land is land where there are ‘Rights of Common’. These rights often date back hundreds of years and grant commoners (typically the public) rights of access. These rights were often originally for the purpose of grazing animals, although now they are usually used for recreation.
CommonersThe general public have a legal right to always access common land unless access is legally restricted.
Restricting access to common land requires the approval of the Secretary of State, although applications for restrictions are made in the first instance to the Planning Inspectorate (PINS).
The bar as to what ‘restricts access’ is set extremely high, even small projects may require Secretary of State approval. Afforestation is likely to be deemed to restrict access. Felling is likely not to be deemed to restrict access, but you will need to consider how you will manage people’s right to access land where you are undertaking potentially hazardous felling activities.
The policy and legal framework for common land is complex so it is good to seek advice at an early stage. The Open Spaces Society (OSS) are the general experts for information on common land, and you may find guidance on common land on GOV.UK. You maycan also wish to contact the Foundation for Common Land (FCL) or PINS directly for their initial thoughts.directly.
If you are planning an afforestation proposal, common land is excluded from ‘low risk land’ for the purposes of forestry EIA.
Common land is also CROW land, also known as ‘open access land’ (see CROW land).
What to do if this affects your proposal
Forest works involving afforestation or restocking will likely need consent from the Secretary of State if they impede access to common land.
It is good practice to engage with the Open Spaces Society (OSS), and theFCL Foundation for Common Land (FCL) about your proposal. The Natural England booklet: A Common Purpose tells you how to conduct community engagement (for example with the OSS, or local communities) for any works on Commoncommon land.
Further Guidance
Foundation for Common Land
Planning Inspectorate (PINS)
Works on Common land
Natural England booklet: A Common Purpose
Open Spaces Society
Conservation Areasareas
Where to check for this constraint
Contact your local planning authority (LPA). They will be able to send you further information and may have self-service online maps available on their website.
Conservation areas are areas that have been designated because of their special architectural or historic interest, the character or appearance of which it is desirable to preserve or enhance.
Many trees in conservation areas are also protected by Tree Preservation Orders (see Tree Preservation Order).
You should always check for conservation areas before considering any felling proposal.
Conservation areas are not listed as a land sensitivity area for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application. Declaration of a conservation area is mandatory for felling licence applications.
What to do if this affects your proposal
You should contact the local authority’s planning or building conservation department to identify if your proposal lies within a Conservation Area.
If you are carrying out tree felling works that do not require a felling licence, you must give the LPA at least six weeks’ notice before carrying out any felling, topping, lopping or uprooting work on trees in a conservation area. However, you cannot give notice more than two2 years before the works being carried out. In this time, the LPA may decide to give the tree a Tree Preservation Order to protect the trees.
If you are carrying out tree felling works that do require a felling licence, you do not need to give the LPA any official notification of the felling works. However, early engagement is often beneficial to resolving potential issues before they arise.
Further guidance
Tree Preservation Orders and trees in conservation areas
Tree felling: getting permission
CROW land (open access land)
Where to check for this constraint
UseUsing Defra’s MAGIC map Layers:
open ‘Map Layers’.
Check: Access > Countryside and Rights of Way Act, Section 15 Land (England)
Check: Access > Countryside and Rights of Way Act 2000 - Access Layer (England)
Check: Access > Registered Common Land (England).
Use Natural England Open Data: and search for ‘CRoWCRoW Act 2000 - Section 16 Dedicated Land’Land.
Key points for applicants
CROW land is land defined by the Countryside Rights of Way Act 2000,2000. hence its name. It includes open country (mountain, moor, heath and down), Common land and land that has been voluntarily (but permanently) ‘dedicated’ by the owner.
The public always have a legal right of access, known informally as ‘right to roam’.
While Commoncommon land is subject to the ‘right to roam’ under the CROW Act, you may need separate permissions to restrict access (see Commoncommon land), as both Commoncommon land rights and CROW rights can exist on top of each other on the same piece of land.
CROW land is not listed as a land sensitivity area for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
You will need to engage the relevant Local Access Forum on your proposal. When you do this, make sure your project plan describes how you will manage public access during the works.
The public always have a legal right to access CROW land, unless a statutory closure (such as a ‘Direction’) is in effect.
If you are felling, you may require a Direction to Restrict Access, for example, to close the site to the public for safety.
If you want to close CROW land for any length of time, you should contact the Natural England Open Access Contact Centre.
Afforestation projects on CROW land are exempt from CROW access rights for 12 months from the first soil disturbance (for example, when the first tree is planted in the ground) associated with planting. Access rights resume after 12 months.
Further guidance
Contact your Local Access Forum
Contact the Natural England Open Access Contact Centre
Open access land: management, rights and responsibilities
Open access land and the coastal margin: how to restrict access
Natural England Open Data - Section 16 Dedicated land
Crown land
Where to check for this constraint
If you are on tenanted farmland your lease should identify whether the freeholder of the land is a government department, the Duchy of Lancaster or Cornwall, the Monarch or held in trust for any of these bodies.
Key points for applicants
A large proportion of English land is Crown land, land which is owned by the government or the crown. This includes land managed by bodies such as the Ministry of Defence, the Forestry Commission and the Duchies of Lancaster and Cornwall.
What to do if this affects your proposal
If you are a tenant on Crown land and you apply for a felling licence, you will need to obtain approval of your restocking proposal from the Crown body from whom you lease the land. You should include this in your felling application. This requirement only applies to restocking, and therefore applications for unconditional felling licences do not need approval from the Crown body.
If you are the owner of Crown land (for example, the Ministry of Defence) you do not require a felling licence. However, you are not exempt from the potential need for a forestry EIA.
Crown land is not listed as a land sensitivity type for forestry EIA purposes.
Further guidance
NationalYou Archives:can Listfind a list of Crown bodies on the National Archives website.
Felling licences
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Obligations on the land,land, then choose:
- Felling Licences (Post May 2018)
- Felling Licences (Pre May 2018)
Key points for applicants
Felling licences generally provide permissions that last for 5 or 10 years. They can either be unconditional or conditional, meaning that restocking is required after felling. Conditional licences require restocked trees to be protected for 10 years after planting or natural regeneration.
If there is an existing felling licence in place on the land, you should make sure you are aware of its conditions. These are usually to restock the felled area within a set timeframe and to maintain those trees for 10 years. You should then check that your new proposal does not conflict with the conditions of the licence.
TheWe Forestrydo Commission does not have the statutory power to amend felling licence conditions. In exceptional circumstances, where there is a strong silvicultural reason for doing so, thewe Forestry Commission may agree not to enforce the conditions of a licence so long as other agreed actions (for instance an alternative restocking solution) are carried out. The seeking of, or enacting of, planning permission will not be considered a silvicultural reason.
Felling licences are not listed as a land sensitivity type for forestry EIA purposes.
What to do if this affects your proposal
Contact the Forestry Commission if you are unsure of how your proposal might conflict with an existing licence.
Further
Read Guidancemore on felling licenses:
Tree felling: getting permission
Tree felling licence: when you need to apply
Grants
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Obligations on the Land,Land, then choose:
- Countryside Stewardship 2015 Case Boundary
- EWGS Case Boundary
- FWPS Case Boundary
- Woodland Grant Scheme Mk3
- Woodland Carbon Fund
Use Defra’s MAGIC map Layers:open ‘Map Layers’.
Check: Land-based Schemes > Agri-Environment Schemes,Schemes, then choose:
- Countryside Stewardship Agreement Management Areas (England)
- Environmental Stewardship Agreements (England)
- English Woodland Grant Schemes (England)
This list is not exhaustive. Other grants may be added to these layers. See also Higher Level Stewardship.
Key points for applicants
Grant scheme obligations can last many decades. A breach of these obligations can result in the original payments being reclaimed in full.
Your proposal may conflict with existing grant scheme rules, and you should check with the grant administrator to see whether this is so.
In certain situations, such as where there is a tree health issue, you may be able to claim Force Majeure in relation to your grant scheme. This will release you from your scheme obligations. The rules on Force Majeure vary from scheme to scheme.
The obligations under the Woodland Carbon Code (WCC) last for many decades and include a commitment to a permanent land use change. Where felling is now proposed that was not identified when a project was validated after planting with the WCC, this poses a risk to the level of carbon, which will be, or which has already been, sequestered. This may affect other contracts you have entered.
Grants are not listed as a land sensitivity type for forestry EIA purposes,purposes but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
Contact the grant administrator to check whether the grant scheme is still in obligation and its conditions still need to be met. If so, check that your proposal does not contravene these obligations. If you need to claim Force Majeure (see above), be aware that there are deadlines to do so, and they vary from scheme to scheme.
For Countryside Stewardship and Environmental Stewardship schemes, contact the Rural Payments AgencyAgency.
Contact (RPA).the WCC secretariat for further information if the proposed felling is not in accordance with the management plan identified when your project was validated after planting with the WCC.
For all other schemes, contact the Forestry Commission in the first instance.
Further guidance
Read more about Legacylegacy woodland grants and obligations.
Heritage coasts
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Heritage Coast.
Key points for applicants
Heritage Coastscoasts were established to conserve the best stretches of undeveloped coast in England. There are currently 32 Heritageheritage Coastscoasts in England.
Heritage Coastscoasts are defined by an agreement between Natural England and the relevant maritime local authority rather than designated, so they do not have their own protections.
However, most Heritageheritage Coastscoasts lie within National Parks and National Landscapes.
Heritage Coastscoasts are not listed as a land sensitivity type for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
Engage with Natural England and the local maritime authority for advice when designing your proposal to ensure it complements the characteristics of the Heritageheritage Coast.coast.
If the Heritageheritage Coastcoast lies within a National Park or National Landscape, contact the National Park Authority or National Landscape Conservation Board for advice.
How your proposal affects the local landscape will be a priority consideration for projects on a Heritageheritage Coast.coast. Refer to the UK Forestry Standard’s landscape guidelines (part 6.4) when designing your proposal.
Further guidance
Read more: Natural England - Heritage Coasts
UK Forestry Standard.
Higher Level Stewardship
Where to check for this constraint
Use Defra’s MAGIC map Layers:open ‘Map Layers’.
Check: Land-based Schemes > Agri-Environment Schemes > Environmental Stewardship Agreements (England),(England), then choosechoose:
- Higher Level Stewardship
- Entry Level plus Higher Level Stewardship
- Organic Entry Level plus Higher Level Stewardship
Key points for applicants
Higher Level Stewardship is part of Environmental Stewardship, an agri-environment scheme funding farmers and landowners to deliver environmental management on their land. Land in Higher Level Stewardship aims to deliver significant environmental benefits in high-priority situations and areas.
If you are planning an afforestation project, land under Higher Level Stewardship is excluded from ‘low risk land’ for the purposes of forestry EIA.
What to do if this affects your proposal
If your land is in Higher Level Stewardship, you may need to get in touch with the Rural Payments Agency about your forestry proposal, particularly if you are applying for a different grant scheme.
Further guidance
Read more: Environmental Stewardship: guidance and forms for agreement holders.
HS2Historic environment sensitivity: ridge and furrow
Where to check for this constraintconstraint
Data Licencing restrictions dictate that the exact location of ridge and furrow in your proposal area cannot be displayed on our map browser.
Contact your local historic environment services (LHES) ahead of submitting your woodland creation proposal. However, not all LHES will have a record of ridge and furrow in their area.
It is usually possible to detect these features visually on the ground, either by walking over the site, or by examining aerial photographs.
UseOnly relevant to woodland creation proposals. Ridge and furrow earthworks are evidence of past agricultural process from prehistoric to post-medieval, with the form and size being indicative of the period of activity. Often these features make a valuable contribution to historic landscape character and sense of place.
Get advice from your local Forestry Commission Woodland Officer or Area Historic Environment Adviser as to whether it is possible to still plant in this area.
Ridge and furrow is not considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
Some ridge and furrow is legally protected as Scheduled Monuments, however most ridge and furrow is either only recorded locally at the historic environment records centre or is unrecorded.
Contact your local Forestry Commission Woodland Officer or Area Historic Environment Adviser at historic@forestrycommission.gov.uk for advice.
Further guidance
Historic environment guidance for forestry in England
When to notify historic environment organisations about forestry proposals
Field Systems: Introductions to Heritage Assets
HS2
Where to check for this constraint
Using the map browser Layers:open Constraints‘Map andLayers’.
Check: Constraints, then choose:
- HS2 - Safeguarding Zones Phase 1
- HS2 - Safeguarding Zones Phase 2A
- HS2 - Safeguarding Zones Phase 2B
Check: Targeting and scoring
, then choose:
- HS2 - Phase 1 25 mile buffer
- HS2 – Phase 2 25 mile buffer
Check: Obligations on the land
, then choose
- HS2 - Limits of Deviation (LOD)
- HS2 - Limits of Land to be Acquired or Used (LLAU)
Key points for applicants
The HS2 (High Speed 2) project for a new north-south railway has affected landowners along its route.
The project is split into phases. phases:
- Phase
11:isMidlands. - Phase
2A2A: from the West Midlands toCrewe,and - Phase
2B2B: from Crewe to Manchester and from the West Midlands toLeeds.Leeds
The safeguarded zone associated with each of these phases marks the area of the project that is protected from any conflicting development. Landowners within the 25 mile buffer zone may be eligible for certain woodland grants.
Land affected by HS2 is not listed as a land sensitivity area for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
Read High Speed 2 (HS2) rail - impacts on woodland management activity: operations note 47 before designing your felling, grant or other forestry proposal.
HS2 Ltd, the company constructing the HS2 railway, can undertake felling works within the safeguarded zone without requiring a felling licence.
If landowners within the safeguarded zone have a felling licence, they can enact their licence until HS2 Ltd takes control of the land, after which the landowner needs permission to do so from HS2 Ltd.
Landowners in the safeguarded zone with woodland created under woodland creation grants may need to claim Force Majeure if their woodland will be lost to the HS2 project.
Further guidance
High Speed 2 (HS2) rail - impacts on woodland management activity: operations note 47
Local Nature Recovery Strategy
Where to check for this constraint
Contact your local council to see if there is one in place.
Key points for applicants
The Local Nature Recovery Strategy aims to restore and link up habitats at a local authority level. If your local council has its Local Nature Recovery Strategy in place, it will produce a statement of biodiversity priorities and a local habitat map. The map will show county wildlife sites, ‘local’ nature reserves and other areas considered to be important for biodiversity.
What to do if this affects your proposal
Check the strategy statement and map to see whether your project is suitable for the area. For example, an area targeted for peatland restoration in a Local Nature Recovery Strategy may not be suitable for an afforestation project.
Contact your local council if you are unsure.unsure.
Further guidance
Find your local council
Find out more about the Nature Recovery Network.
‘Local’ nature reserves
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Local nature reserves.
Key points for applicants
‘Local’ nature reserves are designed for people and wildlife and contain wildlife and geological features of special local interest.
‘Local’Local nature reserves are defined in Section 15 of the National Parks and Access to the Countryside Act 1949. For the purposes of Forestry EIA there are two types of ‘local’ Nature Reserve:
- ‘local’ nature reserves established by local authorities under Section 21(1) of the National Parks and Access to the Countryside Act 1949
- ‘local’ nature reserves not established by local authorities and instead delegated by another authority, such as a National Park Authority or a parish or town council
If you are planning an afforestation proposal, ‘local’ nature reserves designated by local authorities are excluded from ‘low risk land’ for the purposes of forestry EIA.
If you are planning an afforestation proposal, ‘local’ nature reserves that are not designated by local authorities are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
Look up the ‘local’ nature reserve on Natural England’s Designated Sites page to see whether its declaring authority is a local authority (such as a borough or county) or otherwise (for example, a National Park Authority or town or parish council). For the purpose of a forestry EIA application, this will establish whether you need to consider the proposal as a ‘sensitive area’ or outside of a ‘low risk area’.
Contact the authority who manage the reserve (for example, the National Park Authority or the local authority) to find out how you can mitigate any impact from your proposal. Find your local council.
Further guidance
Read more on Natural England’s Designated Sites page
Find your local council.
Local Sites
Where to check for this constraint
Local Sites will be listed by your Local Environment Record Centre (LERC) or by your local authority.
Key points for applicants
Local Sites are not statutorily protected but are considered important to their area, either for their biodiversity or their geology. Some are of SSSI quality.
Local Sites are named differently across the country, but include the following:
- Local Wildlife Sites
- Local Geological Sites
- Sites of Importance for Nature Conservation
(SINCs) - Sites of Nature Conservation Importance
(SNCIs) - Regionally Important Geological Sites
(RIGS) - County Wildlife Sites
Local Sites are not considered a land sensitivity area for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
Contact the authority who manage the site to find out how you can mitigate any impact from your proposal. Local Sites are usually monitored and protected by Local Wildlife Site systems, where authorities like The Wildlife Trust and Natural England work in partnership with local authorities to monitor and protect the site.
Further guidance
Contact your Local Environment Record Centre
The Wildlife Trusts: Information on Local Wildlife Sites
The Geology Trusts may be able to provide local records and maps of Local Geological Sites
Low risk areas for woodland creation (‘low risk land’)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Targeting and scoring > Low Risk Areas for Woodland Creation.
Key points for applicants
Low risk land is a land sensitivity category for forestry EIA afforestation proposals. It can be used to target afforestation proposals and land acquisitions to areas that are most suited for tree planting. Land best suited to afforestation will most likely get a faster EIA decision from the Forestry Commission.
Low risk land excludes all the following sensitive areas:
- Special Areas of Conservation
- Special Protection Areas
- National Landscapes
- National Nature Reserves
- ‘local’ nature reserves not designated by local authorities
- National Parks
- Ramsar Sites
- Scheduled Monuments
- Sites of Special Scientific Interest
- the Norfolk Broads
- World Heritage Sites
Low risk land also excludes:
- areas of peat over 50cm deep
- Acid Vulnerable Catchment
- ‘local’ nature reserves (designated by local authorities)
- common land
- land grant funded within Higher Level Stewardship
- the best and most versatile agricultural land (Land Classes 1 – 3a)
- Priority Habitats (listed under Section 41 of the Natural Environment and Rural Communities Act 2006)
- registered battlefields
- registered parks and gardens
What to do if this affects your proposal
Your proposal is in the most suitable place for afforestation according to national datasets. However, if you are designing an afforestation proposal on low risk land, you should still check for local, small scale sensitivities in the area, such as important areas of priority habitat not recorded on national datasets, and non-designated local heritage assets.
Further guidance
Read more about Environmental Impact Assessment for woodlands.
Listed buildings
Where to check for this constraint
Use Defra’s MAGIC map Layer:open ‘Map Layers’.
Check: Designations > Land-based Designations > Historic Statutory > Listed Buildings (England).
Key points for applicants
Listed buildings are designated for their special architectural and historic interest and have statutory protection. It is estimated there are around 500,000 listed buildings in England, details of which can be found on Historic England’s National Heritage List for England.
Listed building consent must be obtained from the local planning authority to demolish a listed building or any part of it, or to alter it in any way which would affect its character inside or out.
Afforestation, deforestation, road and quarry proposals have potential to affect the setting of listed buildings. Listed building are not listed as a land sensitivity area for forestry EIA purposes, but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
You should contact Historic England if your proposal has potential to affect the setting of grade I and grade II* listed buildings. The Forestry Commission can provide advice on when to engage Historic England.
Further guidance
HistoricRead England
Nationalmore Heritageabout Listlisting forbuildings Englandon Historic England’s website.
Military aircraft crash sites
Where to check for this constraint
Contact the relevant local authority archaeology/historic environment service to discover if there are any known military aircraft crash sites within your proposal area.
Key points for applicants
Military aircraft crash sites are protected from disturbance by legislation.
Military aircraft crash sites are not listed as a land sensitivity area for forestry EIA purposes but may still be considered by the Forestry Commission before determining an application.
What to do if this affects your proposal
An aviation archaeology licence is required from the Ministry of Defence before known military aircraft crash sites can be disturbed.
Further guidance
Historic England: Militarymilitary Aircraftaircraft Crashcrash Sitessites
Ministry of Defence Guidance: Aviation archaeology
National Nature Reserves
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > National Nature Reserves.
Key points for applicants
There are currently over 200 National Nature Reserves (NNRs) in England, each containing important habitat and species. See the full list of National Nature Reserves in England.
Natural England manages about 2 thirds of England’s NNRs. The remaining reserves are managed by organisations approved by Natural England, such as the National Trust.
Most NNRs are also SSSIs (see SSSIs).
NNRs are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
You should contact Natural England to ensure that your proposal is complementary to the aims and objects of the NNR.
Further guidance
National Nature Reserves in England
National Parks
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > National Parks.
Key points for applicants
There are ten10 National Parks in England, each managed by their respective National Park Authority.
You canFind find their details on the National Parks website.
National Parks are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
Ensure that your proposal is complementary to the aims, objectives and characteristics of the National Park, and contact the National Park Authority (NPA) for advice where necessary.
Further guidance
Peaty soils
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Natural England Peat Map.
Key points for applicants
Peatlands are areas of land with a naturally accumulated layer of peat, formed from carbon rich dead and decaying plant material under waterlogged conditions. This build-up of decaying matter creates a rich organic soil that has a high carbon density, even when no longer wet.
Planting trees on peat can result in more carbon being released into the environment than the newly planted trees absorb. Peat may indicate a bog Priority Habitat (see Priority Habitats) such as blanket bog, raised bog or fens. Peat may also be present in smaller quantities in priority habitats such as fragmented heath. Forestry projects on peat therefore need to be carefully considered.
The decision support framework for peatland protection, the establishment of new woodland and re-establishment of existing woodland on peatland in England provides decision frameworks for landowners considering planting trees that may affect peaty soils, as well as for existing woodland on peatland.
Planting (except low density planting) is unlikely to be approved on peat that is 30cm deep or more, or on any area targeted for peatland restoration in a Local Nature Recovery Strategy.
Planting is unlikely to be approved on peaty soil sites that are also protected sites (such as SSSIs), peaty soil sites that are adjacent to protected sites, or sites that have priority habitats or priority species present. The exception to this is native woodland proposals that have been agreed with Natural England.
Planting will need to follow buffer distance guidance in areas with shallow peat connected to areas of deeper peat or GWDTEground (ground water dependent terrestrial ecosystems).ecosystems.
If you are planning an afforestation proposal, peat that is over 50cm in depth is excluded from ‘low risk land’ for the purposes of forestry EIA. However, peat of any depth may be considered by the Forestry Commission in determining your application.
What to do if this affects your proposal
If there is any suspicion of peaty soils on or near your project, you will likely be required to conduct a peat survey and potentially a vegetation survey and organo-mineral soil survey.
Contact Natural England for advice if there is deep peat on or near your proposal to consider whether your proposal includes potential changes that would be regarded as loss or damage. If you are looking to restore peatland habitat in woodland, the Forestry Commission would expect to see endorsement of your proposal from Natural England.
If there is a Local Nature Recovery Strategy in your area, contact your local authority to obtain local habitat maps and find out whether that area is targeted for peatland restoration.
Further guidance
England Peat Action Plan
Decision support framework for peatland protection, the establishment of new woodland and re-establishment of existing woodland on peatland in England
Priority Habitats
Where to check for this constraint
UseUsing the Forestry Commission map browser Layers:open Targeting‘Map andLayers’. scoring,
Check: thenConstraints choose:> Priority Habitats.
CSA
HTlistBiodiversityof-priorityPriorityhabitatHabitatdatasetsNetworkCSwillWCMappear.‘Wood
-Pasture’PriorityandHabitat‘Parkland’NetworkEWCOareBiodiversityalso-priorityPriorityhabitats.HabitatSelectNetworkthese in a separate layer:
Check: Constraints > Wood Pasture and Parkland.
Use Defra’s MAGIC map, Layer:open ‘Map Layers’.
Check: Habitats and species > Habitats > Priority Habitat Inventory (various).
Key points for applicants
Priority habitats are officially named ‘Natural Environment and Rural Communities Act (2006) Section 41 habitats of principal importance’. They wereare largely derived from, and formally known as the UK BAP (UK Biodiversity Action Plan) priority habitats.
There are 56 recognised habitats, and they include areas of woodland, like lowland mixed deciduous woodland, and open habitats, like lowland meadow or reedbeds.
SomeThe priorityPriority habitatHabitat (aroundInventory 40%)also includes 3 additional open ground habitats that are not listed in Section 41 of the 2006 NERC Act:
- fragmented heath
- grass moorland
- good quality semi-improved grassland
Wood Pasture and Parkland is designateda asSection 41 habitat, but represented in a Siteseparate oflayer Specialon Scientificthe InterestForestry (Commission’s Land Information Search.
Some priority habitats (around 40%) are designated as an SSSI). Some isare cared for under Higher Level Stewardship or Countryside Stewardship agreements. However, some does sit outside the protection of all these schemes.
There is a policy presumption against afforestation on Section 41 Priority Habitats. Any afforestation that is approved by the Forestry Commission must be for native woodland only (as this is itself a priority habitat). Refer to Principles for afforestation on or near priority habitats: operations note 43 for guidance on designing your afforestation proposal.
If you are planning an afforestation proposal, Priority Habitats are excluded from ‘low risk land’ for the purposes of forestry EIA.
Natural England can update incorrectly mapped areas of Priority Habitat based on new surveys. Contact Natural England if you believe your proposal’s area to be incorrectly mapped as priority habitat.
What to do if this affects your proposal
For woodland priority habitats contact the Forestry Commission to consider whether your proposal will conform with government policy on priority habitats.
For non-woodland priority habitats (open habitat), you should contact with Natural England to consider whether your proposal includes potential changes to existing priority habitats that would be regarded as loss or damage.
If your proposal is in upland farmland or moorland, you should also be aware of the guidance on protecting breeding waders.
Further guidance
Principles for afforestation on or near priority habitats: operations note 43
Priority open habitats and woodland creation: a field guide
Managing ancient and native woodland in England
ForestryGuidance Commissionto andhelp Naturalinform Englandwhen jointan guidanceupland notebreeding –wader Guidancesurvey foris afforestationneeded proposedand onwhen orwoodland nearcreation nationallyis importantlikely uplandto breedingbe wader areasappropriate
Public rights of way
Where to check for this constraint
Public rights of way are marked on Ordnance Survey and other maps, and on some council websites.
A ‘walk over’ survey should show public rights of way that are not otherwise marked.
Key points for applicants
Public rights of way include footpaths, bridleways, restricted byways and byways. The local highway authority, which sits within the local council, needs to know if you are conducting works that affect any form of public access. In addition to public rights of way, some land has other public access rights, see open access land (CROW land) or common land.
Public rights of way are not a land sensitivity type for forestry EIA purposes.
What to do if this affects your proposal
If there are any rights of way on your site, you will need to get in touch with the local highway authority – set within the local council. Find your local council.
Other types of access may apply on your land. See the entries on this page for CROW and Common land if your proposal sits on either constraint.
Further guidance
Read more about Rights of way and accessing land.
Ramsar Sites
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Ramsar sites.
Key points for applicants
Ramsar Sites are wetlands of international importance designated under the Ramsar Convention.
Ramsar Sites are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
You should contact Natural England if your proposal is within the boundary of a Ramsar Site or could affect it.
TheWe Forestry Commission will screen proposals on Ramsar Sites in accordance with the Conservation of Habitats and Species Regulations 2017 and may carry out an Appropriate Assessment as part of its Habitats Regulations Assessment. When doing so, the Forestry Commission may ask you to provide further information in relation to your proposal’s potential impact upon the features of the Ramsar Site.
Further guidance
Appropriate Assessment: guidance on the use of Habitats Regulations Assessment
Registered Battlefields
Where to check for this constraint
Use Defra’s MAGIC map, Layer:open ‘Map Layers’.
Check: Designations > Land-based designations > Historic non-statutory > Registered Battlefields (England).
Key points for applicants
Registered Battlefields are battlefields that have been designated because of their special historic interest. They are historic non-statutory sites, and there are over 40 of them in England.
Read Moremore details about registered battlefields can be found on Historic England’s National Heritage List for England and Historic England.
Trees and woodlands that are part of the setting of Registered Battlefields may be protected by Tree Preservation Orders (TPOs).
If you are planning an afforestation proposal, Registered Battlefields are excluded from ‘low risk land’ for the purposes of forestry EIA.
What to do if this affects your proposal
You should contact Historic England about your proposal. They may advise that you must gather further advice from archaeological consultants.
Further guidance
Historic England
National Heritage List for England
Registered Parks and Gardens
Where to check for this constraint
Use Defra’s MAGIC map, Layer:open ‘Map Layers’.
Check: Designations > Land-based designations > Historic non-statutory > Registered Parks and Gardens (England).
Key points for applicants
Registered Parks and Gardens are designed landscapes whichthat have been designated by Historic England because of their special historic interest. There are around 1,600 in England, and more information about each of them can be found on Historic England’s National Heritage List for England.
Trees and woodlands within registered gardens and parks may affect other heritage assets like listed buildings. The trees may also be protected by Tree Preservation Orders (TPOs) and the park or garden may be part of a conservation area.
If you are planning an afforestation proposal, Registered Parks and Gardens are excluded from ‘low risk land’ for the purposes of forestry EIA.
What to do if this affects your proposal
Contact The Gardens Trust if your proposal is in or affects a Registered Park or Garden.
You should contact Historic England about your proposal only if it is in or has potential to affect the setting of a Grade I or II* registered park or garden. They may advise that you must seek further advice from archaeological consultants.
Further guidance
HistoricRead Englandmore
Nationalon Heritagethe ListHistoric for England
The Gardens Trustwebsite.
RSPB Important Bird Areas
Where to check for this constraint
Use Defra’s MAGIC map, Layer:open ‘Map Layers’.
Check: Habitats and species > Species > Birds > Important Bird Areas (GB).
Key points for applicants
The Royal Society for the Protection of Birds (RSPB) sponsors important bird areas in the UK. RSPB Important Bird Areas have been recognised as the most important sites for birds in the UK based on the bird numbers and species complements that they hold. They are particularly important for species that congregate in large numbers, such as wintering and passage water birds and breeding sea birds.
If you are planning an afforestation proposal, RSPB Important Bird Areas are excluded from ‘low risk land’ for the purposes of forestry EIA.
What to do if this affects your proposal
You should ensure that you proposal does not adversely affect the RSPB Important Bird Area. You may wish to contact the RSPB about your proposals, particularly in relation to afforestation projects. However, you should note that the RSPB is under no obligation to respond to you.
Further guidance
RSPB Reserves
Where to check for this constraint
Use Defra’s MAGIC Map, Layer:open ‘Map Layers’.
Check: Designations > Land Based Designations > Non-statutory > RSPB Reserves (GB).
Key points for applicants
The RSPB manages over 170 nature reserves for the benefit of wildlife, and details of each specific reserve can be found on the RSPB website.
RSPB Reserves are not listed as a land sensitivity type for forestry EIA purposes.
What to do if this affects your proposal
You should contact the RSPB on your proposal if you are planning a forestry project on, or near to, a reserve.
Further guidance
Sensitivity maps for woodland creation
Where to check for this constraint
Using the map browser open ‘Map Layers’.
Defra’sCheck: MAGICLand Sensitivity, then choose:
- England Woodland Creation Full v4.0
- England Woodland Creation Full v4.0 – Variant 1
- England Woodland Creation Full v4.0 – Variant 2
- England Woodland Creation Full v4.0 – Variant 3
- England Woodland Creation Low Sensitivity v4.0
- England Woodland Creation Low Sensitivity v4.0 – Variant 1
- England Woodland Creation Low Sensitivity v4.0 – Variant 2
- England Woodland Creation Low Sensitivity v4.0 – Variant 3
This is only relevant to woodland creation proposals.
These maps help indicate where there is likely to be potential to establish new woodland with little further environmental due diligence, or where there may be sensitivities that may prevent woodland creation or require your proposal to be modified.
Where the maps show low sensitivity to woodland creation, this does not guarantee we will approve planting. However, the low sensitivity areas do not have many clear constraints to address according to national datasets, and it should be easier to agree creating new woodland here than in other areas.
Likewise, creation of new woodland, particularly of native woodland, may be appropriate outside ‘low sensitivity’ areas. We will determine the appropriateness of proposals in these areas.
The more sensitivities that are present on land, the more due diligence applicants and the Forestry Commission will be required to undertake. Most sensitivities can be accommodated in a well-designed proposal, but accommodating them can require additional evidence and analysis.
Sensitivity maps are different from the ‘Low Risk Map’ for Environmental Impact Assessment purposes. The Low Risk Map is used for decision making under the Forestry EIA Regulations based on sensitivities enshrined in the legislation in 2017. The sensitivity maps represent a more recent understanding of sensitivities that apply to woodland creation, which we may consider for purposes of good due diligence, effective management of public funds and compliance with government environmental policies.
What to do if this affects your proposal
Contact the Forestry Commission for further information on the sensitivity maps and how to use them when preparing your woodland creation proposal.
Further guidance
Read more on the sensitivity maps, including explanation of the different variants that relate to how Protected Landscapes and agricultural land classification: A guide to Forestry Commission’s sensitivity maps for woodland creation.
Scheduled Monuments
Where to check for this constraint
Use Defra’s MAGIC map, Layer:open ‘Map Layers’.
Check: Designations > Land-based designations > Historic statutory > Scheduled Monuments (England).
Key points for applicants
Scheduled Monuments are heritage assets that have been designated because of their national importance. They have statutory protection and work carried out upon them will likely require consent from Historic England.
All Scheduled Monuments are found on Historic England’s National Heritage List for England.
Scheduled Monuments are considered a ‘sensitive area’ for EIA purposes.
What to do if this affects your proposal
You should contact Historic England for advice if your proposal is on, or will affect, a Scheduled Monument or its setting. The Forestry Commission can provide advice on when to engage Historic England on setting.
Before you start work on a project that will directly affect a Scheduled Monument you must apply for Scheduled Monument Consent from the Secretary of State. This is done through an application to Historic England. You must have this consent before any work is carried out.
Further guidance
Historic England
National Heritage List for England
Sites of Special Scientific Interest (SSSIs)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Sites of Special Scientific Interest.
Key points for applicants
Sites of Special Scientific Interest (SSSIs) are designated sites managed by Natural England. The sites are protected due to flora, fauna or geological features which are of particular interest to science. They have statutory protection and work carried out upon them may require consent from Natural England.
Most SSSIs are also designated as Special Areas of Conservation or Special Protection Areas.
SSSIs are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
You should contact Natural England if your work is within or could affect an SSSI.
Each SSSI has a list of ‘operations requiring Natural England’s consent’ that can be found by looking up the site on Natural England’s designated sites system. Check whether your project’s operations apply. If they do, you must apply for formal consent from Natural England if your work is within the boundary of an SSSI. You must have this consent before any work is carried out.
If you are applying to the Forestry Commission for a grant or felling licence, it is recommended that you provide a completed Supplementary notice of operations (SNO) with your application, so that the Forestry Commission can consult Natural England on your behalf. More information about this is set out in Natural England consent for work in Sites of Special Scientific Interest: operations note 27 consent for work in SSSIs.
Further guidance
Sites of specialSpecial scientificScientific interest:Interest: managing your land
Natural England consent for work in Sites of Special Scientific Interest: operations note 27
Supplementary notice of operations within an SSSI
Special Areas of Conservation (SACs)
Where to check for this constraint
UseUsing Forestrythe Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Special Areas of Conservation.
Key points for applicants
Special Areas of Conservation (SACs) are areas in the UK that protect one or more special habitats or species. Along with Special Protection Areas, they form the UK’s national site network, part of the wider Emerald network of Areas of Special Conservation Interest. There are over 200 in England.
Natural England, the statutory body for SACs, has conservation objectives for each of the SACs in England. These are a good reference point for designing your proposal.
SACs are considered a ‘sensitive area’ for forestry EIA purposes.
All SACs are also designated as SSSIs.
What to do if this affects your proposal
You should contact Natural England if your work is within or could affect a SAC and follow the guidance on this page for SSSIs.
Under The Conservation of Habitats and Species Regulations 2017, the Forestry Commission will screen your site and may carry out an Appropriate Assessment as part of its Habitats Regulations Assessment. As part of this process you may be required to provide the Forestry Commission with further information in relation to how your proposal will impact upon the SAC’s features.
Further guidance
Appropriate Assessment: guidance on the use of Habitats Regulations Assessment
Natural England’s SAC Conservation Objectives
Special Protection Areas (SPAs)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Special Protection Areas.
Key points for applicants
Special Protection Areas (SPAs) are protected areas for birds in the UK. Along with Special Areas of Conservation, they form the UK’s national site network, part of the wider Emerald network of Areas of Special Conservation Interest.
Natural England, the statutory body for SPAs, has conservation objectives for each of the SPAs in England. These are a good reference point for designing your proposal.
SPAs are considered a ‘sensitive area’ for forestry EIA purposes.
All SPAs are also designated as SSSIs.
What to do if this affects your proposal
You should contact Natural England if your work is within or could affect an SPA and follow the guidance on this page for SSSIs (see SSSIs).
Under The Conservation of Habitats and Species Regulations 2017, the Forestry Commission will screen your site and may carry out an Appropriate Assessment as part of its Habitats Regulations Assessment. As part of this process, you may be required to provide the Forestry Commission with further information in relation to how your proposal will impact upon the SPA’s features.
Further guidance
Appropriate Assessment: guidance on the use of Habitats Regulations Assessment
Tree health: Ips typographus
Where to check for this constraint
Using the map browser open ‘Map Layers’.
NaturalCheck: England’sConstraints SPA> ConservationIps Objectivestypographus Demarcated Area.
The eight-toothed spruce bark beetle (Ips typographus) is considered a serious pest on spruce in Europe and has recently been found in the wider environment in England.
The beetle is mainly a secondary pest, preferring stressed or weakened trees. However, under the right conditions, beetle numbers can increase enough to result in attacks on healthy trees.
To protect the country’s forestry and timber industry against this pest, the Forestry Commission has introduced a Notice to demarcate an area around the confirmed outbreak sites.
Plant Health (Ips typographus) (Demarcated Area No. 7) Notice, prohibits the planting of any spruce trees (of the genus Picea A. Dietr) within the Ips typographus Demarcated Area. It also restricts the felling, stacking and moving of spruce material, and the movement and methods of forestry operations.
The prohibition has exemptions for certain circumstances of planting, including Christmas tree growers, arboretums, landscapers and private residents, nurseries and foresters. Exemptions from the planting prohibition may also be granted in writing by the Forestry Commission.
The Notice was issued by the Forestry Commission under the powers of The Official Controls (Plant Health and Genetically Modified Organisms) (England) Regulations 2019.
What to do if this affects your proposal
You must consider the restrictions outlined in the Notice and design your forestry proposal accordingly if your site lies within the Demarcated Area.
Consider alternative (re)stocking species appropriate to the site when designing your proposal.
Seek advice from your local Woodland Officer if you require further support.
Further guidance
Planting spruce trees in the Ips typographus demarcated area
Guide to restocking your woodlands (Ips typographus)
Tree Preservation Orders
Where to check for this constraint
Contact your local planning authority (LPA).. They may have online maps available on their local authority website, and they will be able to send you further information. They should also be contacted to check for conservation areas.
Key points for applicants
A Tree Preservation Order (TPO) is an order made by a Local Planning Authority in England to protect specific trees, groups of trees, areas of trees or woodlands in the interests of amenity.
Felling a tree subject to a TPO will require a felling licence from the Forestry Commission, or if the works are exempt from the need for a felling licence (for instance being very small in scale), TPO consent from the Local Planning Authority. Trees that are subject to a live Statutory Plant Health Notice (SPHN) are exempt from the requirement for TPO consent.
You should always check with the Local Planning Authority for TPOs before considering any felling proposal. TPOs are not listed as a land sensitivity type for forestry EIA purposes.
What to do if this affects your proposal
If you are applying for a felling licence, you will not need a separate permission from the Local Planning Authority for the TPO as the Forestry Commission will consult with them on your behalf before granting a licence.
In some cases, the Forestry Commission may refer your felling licence application, in whole or in part (the parts covered by a TPO), to the LPA. The LPA will then determine your application outcome without any more input from the Forestry Commission.
Only where a felling licence is not required (because an exemption to the need for a felling licence applies), must you apply to the LPA directly for consent.
More information about felling licences and TPOs is set out in Operations Note 52: Tree Preservation Orders and trees in conservation areas.
Further guidance
Trees Preservation Orders and trees in conservation areas
Felling licences and Tree Preservation Orders: operations note 52
Tree felling: getting permission
Tree Health – Phytophthora ramorum
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > Phytophthora ramorum risk zones > Zone 1, Zone 2 & Zone 3.
Key points for applicants
Phytophthora ramorum (P. ramorum) is a pathogen that has killed millions of England’s larch trees and also affects a number of other tree and plant species.
England is split into three risk zones, based on the risk of spreading the pathogen P. ramorum in each, with Risk Zone 1 being highest risk.
For felling licence applications, if you want to fell larch within a P. ramorum Risk Zone 1, and apply after 1 October, the Forestry Commission will ask you to agree to an extension of the processing times for your application until after 31 July. This allows the Forestry Commission to assess the condition of the trees and decide whether a felling licence can be approved or if a Statutory Plant Health Notice should be issued to fell the trees. More information is found in Processing felling applications involving larch species: operations note 23.
Consideration should be given to restocking with suspectablesusceptible species within Zone 1. Tree Health zones are not listed as a land sensitivity type for forestry EIA purposes but may still be considered by theus Forestry Commission before determining an application.
What to do if this affects your proposal
If you are applying for a felling licence and will be felling larch in Risk Zone 1, apply for your licence as usual. If you apply after 1 October in any year, you should expect to receive correspondence from the Forestry Commission asking you to agree to an extension.
Further guidance
Processing felling applications involving larch species: operations note 23
World Heritage Sites (UNESCO Sites)
Where to check for this constraint
UseUsing the Forestry Commission map browser Layer:open ‘Map Layers’.
Check: Constraints > World Heritage Site.Site.
Use Defra’s Magic Map, Layer:open ‘Map Layers’.
Check: Historic Statutory > World Heritage Sites (England) > (Buffer Zones and World Heritage Site).
Key points for applicants
World Heritage Sites are cultural and/or natural heritage sites recognised for their outstanding universal value.
There are 19 World Heritage Sites completely or partially in England.
World Heritage Sites are marked with a designated buffer zone around them on mapping tools. You must consider these buffer zones when looking at your proposal.
Specific assets within World Heritage Sites are often designated (for example, as Scheduled Monuments, or as Registered Parks and Gardens).
World Heritage Sites and their buffer zones are considered a ‘sensitive area’ for forestry EIA purposes.
What to do if this affects your proposal
You should contact Historic England about your proposal. You are also encouraged to contact the relevant World Heritage Site Steering Group.
Further guidance
Historic England
World Heritage Sites
Wader Zonal Maps
FurtherWhere to check for this constraint
Using the map browser open ‘Map Layers’.
Check: Wader Zonal Map > Wader Zonal Map.
Ambitious targets have been set for woodland expansion across England. If established in the wrong place, however, new woodland may negatively impact on species reliant on open ground habitats.
Breeding waders, such as the curlew and golden plover, are reliant on open ground habitats during the breeding seasons. Many wader species are of conservation concern because of their declining populations and the internal significance of some of their UK populations.
The Wader Zonal Map shows the predicted relative abundance of ten species of breeding wader for each 1km square of England, Scotland and Wales. Predicted bird numbers are lowest in stratum 1 and highest in stratum 5.
The map does not provide a definitive map of wader populations or distribution. Instead, it uses the best available information to provide a broad indication of areas of likely importance for waders.
Wading birds (and their habitats) are not considered ‘sensitive areas’ for forestry EIA purposes.
What to do if this affects your proposal
Contact Natural England where the guidance on wading birds indicates it is necessary to do so.
Further guidance
Habitats and species of principal importance in England
Sensitivity mapping for breeding waders in Britain | British Trust for Ornithology
Contact us
If you have any questions, you can contact your nearest Forestry Commission area office.
Updates to this page
Published 28 September 2021Last updated
-
Added information about the Woodland Carbon Code in the grants section. Added information on where to find Priority Habitats in the map browser. Added the following new sections: Historic Environment Sensitivity: Ridge and Furrow, Tree Health – Ips typographus, Sensitivity Maps for Woodland Creation and Wader Zonal Maps.
-
Updated to provide further detail on peatland and to reflect the new name for Areas of Outstanding Natural Beauty or AONBs, as National Landscapes.
-
First published.
Sign up for emails or print this page
Explore the topic
Update history
2025-02-28 13:48
Added information about the Woodland Carbon Code in the grants section. Added information on where to find Priority Habitats in the map browser. Added the following new sections: Historic Environment Sensitivity: Ridge and Furrow, Tree Health – Ips typographus, Sensitivity Maps for Woodland Creation and Wader Zonal Maps.
2024-02-26 10:00
Updated to provide further detail on peatland and to reflect the new name for Areas of Outstanding Natural Beauty or AONBs, as National Landscapes.