New nuclear power stations: assessing reactor designs

The Environment Agency, Office for Nuclear Regulation (ONR) and Natural Resources Wales are working together to make sure that any new nuclear power stations built in the UK meet high standards for:

• safety
• security
• environmental protection
• waste management
• nuclear safeguards

Generic Design Assessment

Government has stated that nuclear power plays an important role as part of a mix of different energy sources. In 2007 the UK government asked the regulators to work together to introduce a new process for assessing designs for new nuclear power stations.

The Environment Agency and ONR developed a process called Generic Design Assessment (GDA). They use this process to scrutinise new nuclear power stations at an early stage. This is before a developer has formed detailed proposals for building at a specific site or applied for licences or permits. This means that the regulators can identify potential design or technical concerns early on and ask the designer to resolve them.

The process has up to 3 steps, with the assessment becoming increasingly more detailed. If the design company still has significant issues to resolve after the regulators have completed their planned assessments, further steps can be added to the process.

It takes around 4 years to complete the 3 steps of the GDA process.

1. Initiation

2. Fundamental assessment

3. Detailed assessment

The design company must provide detailed information to make the environment case for their nuclear power station design. The regulators will carefully examine the information and will ask questions. They will request further information if necessary and identify if changes to the design might be needed.

At the end of each step, the regulators issue statements and reports about their findings. What they issue will depend on the scope of the GDA they agreed with the design company during step 1.

If the agreed scope is sufficiently broad and detailed, with the potential to achieve a ‘Statement of Design Acceptability’ (SoDA), then we will consider issuing one. We will only issue a SoDA if we judge that the design is acceptable. Similarly ONR will consider issuing a ‘Design Acceptance Confirmation’ (DAC).

Issuing a SoDA and DAC means that the regulators consider that if a new nuclear power station were built using that design, it should be capable of meeting the UK’s high standards of safety, security and environmental protection.

Before a site operator can build a new nuclear power station, they must apply for and obtain all of the site specific approvals they need. These include:

• environmental permits for construction and operation
• a development consent order (planning permission) from the Secretary of State for Energy Security and Net Zero
• a nuclear site licence and other safety and security consents from ONR

When making decisions about an operator’s environmental permit applications for a proposed site, the Environment Agency will take account of all the work it has done during GDA.

More information about GDA

The regulators have produced some infographics about GDA.

Modernised GDA process and updated guidance

In 2019 the regulators modernised the GDA process, using their learning from previous assessments. They have made the process more flexible to help with the assessment of small modular reactors and less mature designs. This includes providing other options for other GDA outcomes, in addition to the current option of issuing (or not) a DAC and SoDA.

The Environment Agency has produced updated guidance for organisations who want to submit a design for assessment. We refer to these organisations as ‘requesting parties’ because they can be made up of a number of companies, including nuclear power station designers and operators. The guidance explains the GDA process and the information they must provide.

In developing the modernised GDA process the regulators have been careful to make sure that a requesting party still has to meet the same requirements and expectations to achieve a SoDA and DAC.

GDAs started before 2019 followed earlier versions of the assessment of candidate nuclear power plant designs produced by the Environment Agency and ONR.

The regulators will be using the updated guidance for all future GDAs.

During 2024, the regulators published new joint guidance for developers and designers of new nuclear power stations seeking early engagement before entering generic design assessment and permitting. The process enables applicants to develop their understanding of regulatory pathways and requirements.

Public and stakeholder engagement

GDA is an open and transparent process. The nuclear regulators worked with Sciencewise to understand how the public wants to be informed and consulted about assessing new nuclear power station designs.designs.

The Readnuclear regulators also worked with partners and Sciencewise to explore public views toward the finalsiting reportand aboutdeployment thisof workadvanced nuclear technologies., to support policy development and inform future engagement.

There are a number of ways the public and other stakeholders can get involved in GDA.

GDA comments process

A nuclear power station design company going through GDA must set up a website to:

• publish information about the design
• invite the public to ask questions and make comments

The design company must respond to any comments or questions they receive.

The regulators will see the comments and questions and the responses provided. They can also use this information to help inform their assessment work.

The Environment Agency and ONR have set up a joint programme office to help administer the GDA process. During GDA, the joint programme office acts as a single point of contact between the regulators and the design company. The public and stakeholders can also send their comments to the joint programme office.

The comments process is open throughout a GDA. It closes about 4 months before the regulators issue statements at the end of steps 2 and 3, or make decisions about issuing a SoDA or DAC.

The comments process document on the ONR website has more information about how it works.

Consulting on GDA findings

During step 3, the Environment Agency will consult on its preliminary GDA findings from the detailed assessment if the scope agreed with the requesting party is sufficient to consider issuing a SoDA. This follows the same approach as the original GDA process. If the agreed scope is not sufficient to consider issuing a SoDA, the Environment Agency will not consult.

The Environment Agency will carefully consider all the comments we receive during the consultation on our preliminary findings. We will use the comments to help inform our assessment and decision about whether to issue a SoDA for a particular design.

Meetings and events

You can talk to the Environment Agency about assessing new nuclear power station designs at:

• site stakeholder groups
• local community liaison councils
• industry conferences
• public events

To find out when these will take place, email the Environment Agency: nuclear@environment-agency.gov.uk.

Ongoing and completed GDAs

Information about GDAs that are in progress or have ended.

GE Hitachi Nuclear Energy – BWRX-300 small modular reactor

The regulators began a 2 step GDA for the GE Hitachi Nuclear Energy BWRX-300 small modular reactor on 25 January 2024. This follows a request from the Department for Energy Security and Net Zero to carry out the GDA following a review of GE Hitachi’s application.

The BWRX-300 design is a SMR. It uses boiling water reactor technology.

The requesting party is GE Hitachi. GE Hitachi has applied for a 2 step GDA.

The regulators are now carrying out step 1 of GDA. Step 1 is the preparatory part of the design assessment process where the regulators make agreements with the company and provide advice on the scope and the information the company is submitting for GDA. As part of this step the regulators will carry out a review of GE Hitachi’s management arrangements and will confirm if appropriate arrangements have been put in place for successful delivery of the GDA process.

The comments process for this GDA will open at the beginning of step 2 – a date for this will be set during step 1. This process provides an opportunity for the public and other stakeholders to have their say on the design.

Holtec InternationalInternational –  – SMR-300 small modular reactor

The regulators began a 2 step GDA for the Holtec SMR-300 design on 18 October 2023. This follows a request from the Department for Energy Security and Net Zero to carry out the GDA following a review of Holtec’s application.

The SMR-300 design is a small modular reactor and uses pressurised water reactor technology.

The requesting party is Holtec International. The GDA will be managed by Holtec Britain Limited. Holtec has applied for a 2 step GDA.

The regulators completed GDA Step 1 of the Holtec SMR in August 2024.

The regulators are now carrying out step 12 of GDA. Step 12 is the preparatoryfirst partmajor oftechnical the design assessment processand wherefocuses theon regulators make agreements with the Requestingenvironmental Partyprotection andfeatures Holtecof Britainthis Limiteddesign. andStep provide2 adviceis oncurrently theplanned scopeto andtake the15 informationmonths.

The theycomments areprocess submitting for this GDA. opened Asin partAugust of2024. thisIt stepwill thestay regulatorsopen willuntil carryaround out4 amonths reviewbefore the end of Holtec’sstep management2. arrangementsThis andprocess willprovides confirman ifopportunity appropriatefor arrangementsthe havepublic beenand putother instakeholders placeto forhave successfultheir deliverysay ofon the GDA process.design.

TheYou commentscan processmake forcomments this GDA willor openask at the beginning of step 2 – a datequestion forabout this willdesign beon setthe Holtec duringBritain stepGDA 1.website.

You Thiscan processalso providessend ancomments opportunitythrough for the publicjoint andprogramme otheroffice stakeholdersby toemailing jpo-smr-300@onr.gov.uk.

Find haveout theirmore sayabout onthe GDA for the design.Holtec International SMR on the joint regulators website.

Rolls-Royce SMR LtdLimited – 470MWe small modular reactor

The regulators began assessing the Rolls-Royce SMR in April 2022. This follows a request from the Department for Business, Energy & Industrial Strategy on 3 March 2022, to carry out the GDA following a review of Rolls-Royce SMR Ltd’sLimited’s application.

The 470MWe small modular reactor uses pressurised water reactor technology. This GDA willis be the first on a design developed in the UK.

The requesting party is Rolls-Royce SMR Limited.

The regulators completed GDA step 1 in April 2023. Read the GDA step 1 of the Rolls-Royce SMR: statement of findings.

The regulators completed GDA step 2 in July 2024. Read the GDA step 2 of the Rolls-Royce SMR: statement of findings.

The regulators are now carrying out the next step 3 of GDA. Step 23 is the firstdetailed majorassessment technicaland, assessmentfor the Environment Agency and Natural Resources Wales, it focuses on the environment protectioncase featuresand ofincludes thisa design.public consultation on the preliminary findings. Step 23 is currently planned to take around 1517 months.months and finish in December 2026, which will be the end of the GDA process for the Rolls-Royce SMR.

The comments process for this GDA opened in April 2023. It will stay open until around 4 months before the regulators make their final decision.

You can make comments or ask a question about this design on the Rolls-Royce SMR website.

ToYou can also send comments tothrough the joint programme office,office emailby jpo@onr.gov.ukemailing jpo-rr-smr@onr.gov.uk.

Find out more about the GDA for Rolls-Royce SMR on the joint regulators website.

General Nuclear System Ltd – UK HPR1000

The regulators began assessing the UK HPR1000 in January 2017. The requesting party consists of China General Nuclear Power Corporation, Électricité de France S.A. and General Nuclear International Limited, with General Nuclear System Ltd acting on behalf of the requesting parties. They moved to step 2 of the GDA in November 2017 and completed the initial, high level technical assessment in November 2018.

Read the summary report for the initial assessment of the UK HPR1000 design.

The Environment Agency consulted on their findings from their environmental assessment from 11 January 2021 to 4 April 2021.

The comments process for this GDA opened in November 2017 and closed in September 2021. You can read about the comments process or look at the information about the design on the UK HPR1000 website.

In January 2022 the regulators completed their GDA for this design and concluded that it should be capable of meeting UK safety, security and environment protection requirements.

Read the Environment Agency’s documents about the GDA for the UK HPR1000 design.

EDF and Areva – UK EPR

The regulators began assessing EDF and Areva’s UK EPR nuclear power station design in 2007.

The Environment Agency consulted on its findings from its environmental assessment from 28 June to 18 October 2010 and published its decision and interim SoDA in December 2011.

In December 2012, the regulators completed their GDA of this design and concluded that it should be capable of meeting UK safety, security and environment protection requirements.

EDF Energy is building this reactor design at Hinkley Point in Somerset and Sizewell in Suffolk.

Find out more about the Environment Agency’s regulation of Hinkley Point nuclear power station.

Find out more about the Environment Agency’s regulation of Sizewell in Suffolk.

Read the regulator’s documents about the GDA for EDF and Areva’s UK EPR nuclear power station design.

Read information about this design on the EDF website.

Hitachi GE UK Advanced Boiling Water Reactor (ABWR)

The regulators began assessing Hitachi GE’s UK ABWR nuclear power station design in January 2014.

The Environment Agency and Natural Resources Wales consulted on their findings from their environmental assessment from 12 December 2016 to 3 March 2017.

In December 2017 the regulators completed their GDA of this design and concluded that it should be capable of meeting UK safety, security and environment protection requirements.

Read the regulators’ documents about the GDA for Hitachi GE’s UK ABWR nuclear power station design.

You can also read information about this design on the Hitachi GE website.

Westinghouse Electric Company AP1000

The regulators began assessing Westinghouse Electric Company’s AP1000 nuclear power station design in 2007.

The Environment Agency consulted on its findings from its environmental assessment from 28 June to 18 October 2010. It published its decision and an interim SoDA in December 2011.

In March 2017 the regulators completed their GDA of this design and concluded that it should be capable of meeting UK safety, security and environment protection requirements.

Read the regulators’ documents about the GDA for the Westinghouse Electric Company’s AP1000 nuclear power station design.

You can also read information about this design on the Westinghouse website.

Contacts

Email the Environment Agency: nuclear@environment-agency.gov.uk.

Email the ONR: contact@onr.gov.uk.

Sign up for the nuclear regulators’ new reactors joint e-bulletin.

To sign up for the Environment Agency’s nuclear regulation e-bulletin, email: nuclear@environment-agency.gov.uk.

More information

Read the government’s National Policy Statement for nuclear power generation.

Read the government’s guidance for developers of new nuclear power stations.

Read about how the Environment Agency, ONR and Natural Resources Wales work together on GDA.

Read about ONR’s work on nuclear new build.

Read about Natural Resources Wales’s work on nuclear new build.